Belkin F1DA108Q User Manual page 26

Omniview pro3 ps/2 kvm switch

Table of Contents

Using your PRO3 KVM Switch

With a daisy-chain switch configuration, you can switch between BANKs (KVM

switches) by pressing "Scroll Lock", "Scroll Lock", "Page Up", to switch to the

previous BANK. Press "Scroll Lock", "Scroll Lock", "Page Down", to switch to

the next BANK.

With a daisy-chain switch configuration, you can switch directly to any port on

any BANK by pressing "Scroll Lock", "Scroll Lock", BANK address, and port

number. For example, if you press "Scroll Lock", "Scroll Lock", "03", "05", the

server on BANK 03, Port 5 will become active.

Note: You will have approximately three seconds to complete each

hot-key sequence.

See page 30 for instructions on how to change the hot-key-initiator key.

��

Table of Contents

F1da108tea F1da116q F1da104qea F1da108qea F1da116qea