Table of Contents
Advertisement
2.
Insert the microSD card until it clicks into place.
■ Note:
Before installing the microSD card, power your phone off, to prevent the data stored in the
microSD card from being lost.
2.2.3 Charging the Battery
The mobile phone comes with a built-in battery. Connect the charger to the mobile phone using
the supplied USB cable to charge the battery.
If your phone is charged when it is powered on, the battery icon on the notifications bar shows the
charging status. When the battery icon changes to
charged.
■ Note:
When the mobile phone cannot be turned on because of the exhausted battery, please charge
the battery with the charger and wait for several minutes until the battery charging image appears.
2.2.4 Important Information About the Battery
•
If the battery has not been used for a long period of time, you may not be able to power on
your phone immediately after you begin charging the battery. Allow the battery to charge for a
few minutes with the phone powered off before attempting to power on the phone.
•
Rechargeable batteries have a limited number of charge cycles and may eventually need to be
replaced. The battery isn't user replaceable; it can be replaced only by an authorized service
provider.
•
Using data services increases demand on the battery.
•
The time required to charge the battery depends on the ambient temperature and the age of
the battery.
•
When the battery is low on power, the phone plays an alert and displays a prompt. When
battery power is almost exhausted, your phone will power off automatically.
2.2.5 Battery Saving Tips
Battery life depends on network features and how you use your phone.
Try the following to conserve battery power:
•
When you do not need 3G services, set your phone to connect to a 2G network.
•
Set the screen timeout to automatically switch the screen off when the phone is not in use.
•
Lower the screen brightness.
•
Turn off Bluetooth when not in use.
6
, it indicates that your phone is fully
Advertisement
Table of Contents
