Other Operations During A Call - Huawei Vision User Manual

4.3 Other Operations During a Call

When a new call is received during a call, you can answer the new call and put the current one on
hold, switch between calls, or set up a conference call.
4.3.1 Making a Conference Call
Conference call allows you to set up a phone conversation with multiple participants at the same
time.
■ Note:
Conference call is network dependent. Contact your service provider for the availability of this
feature and the maximum number of participants, if any.
1. Make the first call. Once connected, touch
2. Make the second call. Once connected, touch
3. To add more calls, touch
To end the conference call and disconnect from everyone, touch End.
4.
4.3.2 Switching Between Calls
1. While you are on the first call when the second call comes in, answer the incoming call. This
automatically places the first call on hold.
To switch back to the first call, touch Swap.
2.
4.3.3 Muting the Microphone
Mute
During a call, touch
To undo mute, touch
4.3.4 Turning the Speakerphone On or Off
Speaker
During a call, touch
To turn off the speakerphone, touch
4.3.5 Using Bluetooth Device
■ Note:
Before using this function, you must enable Bluetooth on your phone and pair with the Bluetooth
device.
Bluetooth
During a call, touch
To turn off the Bluetooth speaker, touch
Add call, and repeat step 2.
to mute the microphone.
Mute
again.
to turn on the speakerphone.
Speaker
to use the Bluetooth device speaker.
Bluetooth
Add call
to place the current call on hold.
Merge calls
to begin the conference call.
again.
again.
17