Fishman ELLIPSE MATRIX BLEND User Manual page 4

Controls (continued)
Microphone Position
Position the microphone to fi nd the "sweet spot" inside the instrument. Take the
time to experiment with microphone placement until you fi nd the position that
works best in your instrument.
Plug in the guitar and move the Blend slider to the left for mic only. Start with
the mic capsule so that it faces the back of the guitar. Move the mic closer to the
soundhole for more bass. Turn the capsule toward the sides of the instrument for
less bass.
Microphone T rim
The microphone and pickup levels are preset at the factory and do not require
adjustment. However, a microphone trim control (recessed below the Volume
slider) may be adjusted to alter the microphone and pickup balance. Set the
Blend slider to the center position and adjust the trim control as necessary.
4