Audi A4 Owner's Manual page 315

document_0900452a81b1b9de.book Seite 313 Donnerstag, 26. Juli 2007 9:16 09
Changing bulbs
All bulbs can be changed easily after removing the rear
light.
– Detach the bulb carrier.
– Renew the defective bulb (pull to remove from plug-in
holder or turn to remove from bayonet holder)
⇒ page 305.
– Attach the bulb carrier.
– Re-install the rear light ⇒ page 313.
Controls
Applies to vehicles: with halogen main beam headlights
Installing rear light
The rear light is easy to re-install.
Fig. 304 Rear light,
mounting plate is high-
lighted
To re-install the rear light, follow the steps for removal in
reverse sequence.
– Plug in the electrical connector. Make sure you hear it
– Insert the rear light into the rear light carrier ⇒ fig. 305.
– Press the rear light into the two rubber mountings as far
– Use the screw to secure the rear light from the luggage
– Make sure that all bulbs for the rear lights are working.
Take care when installing the rear light to make sure there is no
damage to the paintwork or any of its components.
Safety Driving tips General maintenance
click into place.
as it will go. The rear light must be flush with the body
contour.
compartment.
Caution
Self-help
Fuses and bulbs 313
Fig. 305 Installing rear
light
Technical data