Asko 1485 Quick Start Manual

Quick Start Guide
We know you're excited about owning an ASKO dishwasher and you're anxious to get started, so here's a brief summary of the
operation procedures. The page references in this guide refer to the Use and Care Guide . To get the most out of the features of your
new dishwasher, we recommend that you read the Use and Care Guide .
THE CONTR THE CONTR THE CONTROL P THE CONTR THE CONTR OL P OL P OL P OL PANEL
Model 1485 has a touchpad control panel, as illustrated below. To select a wash program or the heat fan dry option, simply press the
appropriate touchpad. When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you
selected that program.
Indicator Lights
These lights glow red to
indicate the program you
have selected.
PROGRAMS PROGRAMS PROGRAMS
PROGRAMS PROGRAMS
Your ASKO dishwasher has three wash programs, a rinse and hold option and a heat fan dry option. Press the touchpad to select
the desired program and option.
Pots and pans
For the heaviest soiled loads, such as pots, pans,
casseroles, etc.
Normal
For normal wash loads.
Hea Heat f Hea t fan dr t f t f an dr an dr y y y y y an dr
Hea Hea t f an dr
This touchpad activates the heating element during the drying cycle to speed up the drying process.
CHANGING A PROGRAM CHANGING A PROGRAM CHANGING A PROGRAM CHANGING A PROGRAM CHANGING A PROGRAM
If you've started the dishwasher then decide to change the program or turn off the heat fan dry option, simply press the original
program touchpad for three to five seconds to stop the dishwasher. You can then press the touchpad for the desired program.
UNDERST UNDERST ANDING ANDING
UNDERST UNDERST UNDERSTANDING ANDING ANDING THE INDICA
When the dishwasher has finished, all of the indicator lights will come on. The lights will remain on until you open the door. When
you open the door, the indicator light for the wash program you last used will come on. If you used the heat dry option, that light will
come on, too.
If the lights flash in an alternating pattern after you have started a program, this usually means the dishwasher door is not closed
securely.
If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. (See page 7.) Should this
happen, call the ASKO Advisory Center.
ANEL ANEL ANEL ANEL
Touchpad Controls
Press one of these touchpads to select a program.
Pots
Norm
and
wash
pans
LED Window
The LED window displays water temperature,
program run time and fault codes.
THE INDICA THE INDICAT T T T T OR LIGHTS THE INDICA
THE INDICA
Rinse Heat
and fan
hold dry
Quick
For lightly soiled loads. Items such as fine china
and crystal can be washed in this program, but
your should turn the heat dry off.
Rinse and hold
To rinse dishes that you plan to wash later that
day.
OR LIGHTS OR LIGHTS
OR LIGHTS OR LIGHTS
Model 1485
Heat fan dry
Press this touchpad to activate
the heating element during the
drying cycle.