Onkyo HT-S770 Instruction Manual page 48

Advanced Setup —Continued
These settings only need to be changed if
you're not using the HTP-520 speakers. If you
are using the all HTP-520 speakers, you don't
need to change anything.
Speaker Configuration
This section explains how to specify which speakers are
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify Large . For those with a
smaller diameter, specify Small .
ON STANDBY
V1
1
DVD MULTI CH
4
CD TAPE
7
+ 10
--/---
TONE
REMOTE MODE
DVD
TV VCR
DIMMER
TV
INPUT
ENTER
+
CH
DISC
-
PREV
CH
DISPLAY
REC SP A
AUDIO SUBTITLE
SURR ALL ST
REPEAT
DIRECT
1 Press the [AMP] button followed
AMP
by the [SETUP] button.
2
Use the Up and Down [
buttons to select "1. SP Config,"
and then press the [ENTER] but-
ENTER
ton.
ENTER
48
Cone diameter
T V
I INPUT
V2 V3
+
2 3
TV CH
-
5 6
TUNER
8 9
T V VOL
0 CLEAR
TUNER/
TAPE
_ AMP
+
AMP
CD MD CDR
CABLE SAT
SLEEP
ENTER VOL
SETUP
MUTING
SP B RANDOM
ANGLE LAST M
STEREO
A-B SEARCH MEMORY
DSP DSP
]/[ ]
3
While the Subwoofer setting is
selected, use the Left and Right
[ ]/[ ] buttons to select Yes or
ENTER
No .
Yes: Select if a subwoofer is con-
nected.
No: Select if no subwoofer is con-
nected.
4
Use the Down [
select "Front," and then use the
Left and Right [
ENTER
select Small or Large .
Small: Select if the front speakers are
small.
Large: Select if the front speakers are
large.
ENTER
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
5
Use the Down[
select "Center," and then use the
Left and Right [
ENTER
select Small , Large , or None .
Small: Select if the center speaker is
small.
Large: Select if the center speaker is
large.
ENTER
None: Select if no center speaker is
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
6
Use the Down[
select "Surround," and then use
the Left and Right [
ENTER
tons to select Small , Large , or
None .
Small: Select if the surround left and
right speakers are small.
Large: Select if the surround left and
ENTER
right speakers are large.
None: Select if no surround left and
right speakers are connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
] button to
]/[ ] buttons to
] button to
]/[ ] buttons to
] button to
]/[ ] but-