Onkyo HT-S6500 Instruction Manual page 37

Listening Mode Description
DTS Neo:6 This mode expands any 2-channel source for
up to 5.1-channel playback. It uses seven
N e o N e o : : 6 6 C i n e m a
full-bandwidth channels of matrix decoding
for matrix-encoded material, providing a
N e o : 6 M u s i c
very natural and seamless surround sound
experience that fully envelops the listener.
• DTS Neo:6 Cinema
Use this mode with any stereo movie (e.g.,
TV, DVD, VHS).
• DTS Neo:6 Music
Use this mode with any stereo music source
(e.g., CD, radio, cassette, TV, VHS, DVD).
Note
*1 (North American models) This listening mode is not available.
*2 Pure Audio cannot be selected when Zone 2 is active.
Besides, if you activate Zone 2 while Pure Audio is selected, the listening mode will automatically
switch to Direct.
*3 The AV receiver can input the DSD signal from HDMI IN. Depending on the player, setting the
output on the player side to PCM might bring better sound.
*4
For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.
• The listening modes cannot be selected with some source formats.
Input Speaker
Source Layout
En-37
Turning On & Basic Operations