Project Migration (From Previous Versions Of Tpdesign4); System-Generated File Names - AMX TPDESIGN4 V2.5 Instruction Manual

Project Migration (from previous versions of TPDesign4)

If a TP4 project file created with a previous version of TPDesign4 is opened (File > Open), the
Project Migration dialog appears, prompting you to continue with the migration process.
Once the migration process is complete and the project file has been saved, this process will not
have to be performed again.

System-Generated File Names

When you are creating a new Project, you are given the option to use System Generated File Names
(in the New Project Wizard dialog). System-generated file names are generated automatically based
on several fields that hold various types of project information (Designer, Dealer ID, Sales Order,
Purchase Order, and Revision).
When you utilize System-Generated File Names, the resulting filename for this project file consists
of each of these entries separated by commas. These fields are all optional. If you leave any of the
fields blank, they are simply omitted from the file name. For example, if all fields are filled in as
shown in below,
FIG. 12 System Generated File Names
The resulting file name would be:
The Purchase Order field and the (optional) Job comments field are not incorporated
into the generated filename. Use these fields to enter this additional information for
this project. All information entered in this dialog can be viewed/edited at any time via
the Panel Properties dialog.
If you select not to use System-Generated File Names, the file name will match the Job Name
entered in the first dialog of the New Project Wizard.
TPDesign4 Touch Panel Design Program
Click Yes to continue, then save the file.
Click Cancel to abort the file open command.
"1234,My TP Project,5678-9876,rev a,Super-Dave .TP4"
TPDesign4 Project Files
29