AMX CAFE DUET STANDARD NETLINX API (SNAPI) DEVICES Instruction Manual page 73

Digital Media Encoder Functions (Cont.)
Name
processTrackInfoEvent(TrackInfo)
processTrackPropertiesEvent(Properties)
cycleGainMute()
setGain(level)
setGainMuteOn(state)
setGainRamp(UP)
setGainRamp(DOWN)
processGainEvent(int)
processGainMuteEvent(boolean)
processGainRampEvent(UP)
processGainRampEvent(DOWN)
getDebugState()
getFWVersion()
getProperty(key)
getVersion()
loadProperties(fileName)
passThru(buffer)
reinitialize()
setDebugState(state)
Standard NetLinx API (SNAPI) R 1.8.0
Component Channel Level Command
IDiscTransportComponentListener
IDiscTransportComponentListener
IGainComponent 144
IGainComponent
IGainComponent 143
IGainComponent 140
IGainComponent 141
IGainComponentListener
IGainComponentListener 143
IGainComponentListener 140
IGainComponentListener 141
IModuleComponent
IModuleComponent
IModuleComponent
IModuleComponent
IModuleComponent
IModuleComponent
IModuleComponent
IModuleComponent
Constant
TRACKINFO-
<num>,<dura-
tion>,<discNumber>
TRACKPROP-
<key>,<value>
GAIN_MUTE
5 GAIN_LVL
GAIN_MUTE_ON
GAIN_UP
GAIN_DN
5 GAIN_LVL
GAIN_MUTE_FB
GAIN_UP_FB
GAIN_DN_FB
?DEBUG
?FWVERSION
?PROPERTY-<key>
?VERSION
LOADPROPERTY-
<file>
PASSTHRU-<buffer>
REINIT
DEBUG-<state>
Notes
Track info changed, where <num> is track
number, <duration> is a track duration
String in the format [-]hh:mm:ss.ff and <dis-
cNumber> is the dusc number the track
belongs to.
Track properties query response, responds
with multiple TRACKPROP-<key>,<value>
commands, one for each key
Momentary Function Channel: Cycle gain
mute when channel is activated
Set gain, range is 0-255
Discrete Function Channel: Gain mute is
on while channel is active
Ramping Channel: Gain is ramped up while
channel is active
Ramping Channel: Gain is ramped down
while channel is active
Gain changed, range is 0-255
Feedback Channel: Gain is muted if chan-
nel is on
Feedback Channel: Gain is ramping up
while channel is on
Feedback Channel: Gain is ramping down
while channel is on
Query the debug level, responds with
DEBUG-<state> where <state> is 1-4 for
ERROR, WARNING, DEBUG, INFO
Query for the device firmware version,
responds with FWVERSION-<version>
Query for the value of property <key>,
respond with PROPERTY-<key>,<value>
Query for the module version, responds
with VERSION-<version>
Load properties from the file with the sup-
plied filename. Used to load meta-data
properties for modules including Generic IR
modules.
Send a message directly to the device
Reinitialize communication with the device
Set the debug state where <state> is 1-4
for ERROR, WARNING, DEBUG, INFO
69