TOOLS REQUIRED
Tools Required For Installation
• Phillips Screwdriver
• 3/8" Open End Wrench
• Electric Drill
• Drill Bit: 1/4', 13/64",15/32" and #32 Bit
• Other Tools May Be Required Based On Your Vehicle Type Or
Requirements For Customized Installation
Dimensions:
• Control Panel: .95" H x 3.22" W x .58" L
• Laser/Radar Antenna: 1.74" H x 3.54" W x .90" L
• Interface Box: 2.36" H x 4.40" W x .90" L
• Voice Module: 2.19" W x 1.21" L
Cable Lengths:
• Laser/Radar Antenna Cable: 3'
• Voice Module Cable: 6'
• Control Panel Cable: 6'
• Alert/Security LED Cable: 6'
• Power Cable: 6'
• Interconnecting Cable: 20'
Specifications are subject to change without notice.
1
TABLE OF CONTENTS
Topic
Components
Mounting Fasteners
Installation of Temperature Probe
Installation of Interface Box (iBox)
Installation of Alert LED
Installation of Voice Module
Installation of Optional Rear
Installation of Optional GPS Module
Optional Accessories
Installation of Through Dash Bracket
Page
1
3 - 4
5
6
7 - 11
11
12 - 13
13
14 - 15
16
17
17
18
19
20
21
22
23 - 24
2