Make Calls; Troubleshooting; Turn Headset On/Off; Indicator Light - Samsung WEP200 - WEP 200 - Headset Quick Start Manual

Features and

Turn headset on/off

Functions Guide
To turn the headset on,
Press and hold the Multi-Function button for
4 seconds until you see 4 blue flashes on the
SAMSUNG
indicator light, then release.
You will hear a tone and see the indicator light
Bluetooth Mono Headset
flashes while the power is on
WEP200
(see Meaning of the indicator light of this guide).
To turn the headset off,
Press and hold the Multi-Function button for
4 seconds until you see 2 blue flashes on the
Important:
indicator light, then release.
You will hear series of 2 tones and see the indicator
Be sure to first follow the
light stops flashing.
Quick Start Guide on
the reverse side of this guide
to complete initial setup
of your headset.

Make calls

Making a voice activated call
If the phone's voice recognition feature is on, you can
make a voice activated call.
Press the Multi-Function button once. You will hear the
Headquarters:
voice-activation tone.
1301 East Lookout Drive Suite 150
Say the name of the person you wish to call.
Richardson, TX 75082
Depending on your phone, this feature may not be
supported.
Internet Address:
http://www.samsungmobileusa.com/
Redialing the last number
accessories
If the phone's voice recognition feature is off, press and
Customer Care Center:
hold the Multi-Function button for 2 seconds, twice.
1-888-987-4357
If the phone's voice recognition feature is on,
1
Wear the headset
Wear the headset on your ear.
In general, you will get better performance
when there are no obstructions
(including parts of your body)
between the headset
and the phone.
2
3
End a call
Press the Multi-Function button once.
Answer a call
• After you hear the ring tone, press the Multi-Function
button once.
• If you answer the call with your phone, you can transfer
the call to the headset by pressing the Multi-Function
button.
Reject a call
Press the Multi-Function button and listen for the When you receive a call, press and hold the Multi-Function
voice-activation tone. When you hear it, press the button for 2 seconds to reject the call. Depending on your
button again to cancel the feature. phone's setting or type, you may only be able to mute the
ringer or this feature may not be supported.
Change for use on other ear
Depending on which ear you are going to wear the
headset, simply adjust the hook accordingly.
Adjust the volume
Press [ ] on the side of the headset to increase
the volume level and press [ ] to decrease the
volume level.
Use enhanced features
Press and hold the Multi-Function button to access the
recent call list.
Enhanced features are available for phones that support the
Press and hold the Multi-Function button to make a call
hands-free Bluetooth profile and enhanced features.
to the last number you have dialed or received.
• Answer a second call
When your phone notifies you of another incoming call while
you are on a call, press and hold the Multi-Function button for
2 seconds.
You can switch between calls by pressing and holding it for
2 seconds.
Depending on your phone, this feature may not be supported.
• Place a call on hold
While you are on a call, press and hold the Multi-Function
button for 2 seconds.
To retrieve the call, press and hold the Multi-Function button
for 2 seconds again.
Depending on your phone, this feature may not be supported.
• Switch off the microphone
Press and hold the Up volume control button to switch off the
headset's microphone.
To switch it back on, press and hold the button again.

Troubleshooting

My phone does not find my headset.
Make sure the blue indicator light on your
headset turns on when your phone is
searching for devices.
My headsest worked before but now it is
not working.
Make sure your phone is on and the Bluetooth
Left Right
feature is turned on in your phone.
If the Bluetooth feature has been turnned off
or was turned on only temporarily, you may
need to restart the Bluetooth feature.
If you have confirmed the Bluetooth feature is
on in your phone, pair your phone and
headset again.
Meaning of the indicator light
Light Tone
Flashes in Quick series
(switching between 2 calls)
blue every of 2 tones.
8 seconds. (Active mode
starts.)
Flashes in Quick series
blue every 3 of 2 tones.
seconds. (Standby
mode starts.)
Flashes in 5 tones every
red instead 20 seconds.
of blue.
* Depending on the phone type and usage, the actual time
may vary.
Status
The headset is in Active mode.
• The headset has an active
call in progress.
• You can talk up to 4 hours.
The headset is in Standby mode.
• The headset is waiting
for a call.
• The headset can be in
Standby mode up to 70
hours.*
The battery of the headset is
low. Recharge the battery.
• There is only 1 minute of
talk time left.