Audience; Organization - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Audience

Audience

This documentation is designed for the person installing, configuring, and maintaining the router, who
should be familiar with electronic circuitry and wiring practices and has experience as an electronic or
electromechanical technician. The documentation identifies those procedures that should be performed
only by trained and qualified personnel.

Organization

Table 1-1
Table 1-1
Title
Overview of Cisco 1800 Series Routers
(Modular)
Preinstallation Requirements and
Planning for Cisco 1800 Series Routers
(Modular)
Cable Information and Specifications for
Cisco 1800 Series Routers (Modular)
Chassis Installation Procedures for Cisco
1800 Series Routers (Modular)
Cable Connection Procedures for Cisco
1800 Series Routers (Modular)
Power-Up Procedures for Cisco 1800
Series Routers (Modular)
Troubleshooting Cisco 1800 Series
Routers (Modular)
Installing Interface Cards in Cisco 1800
Series Routers (Modular)
Installing and Upgrading Internal
Modules in Cisco 1800 Series Routers
(Modular)
Installing and Replacing CompactFlash
Memory Cards on Cisco 1800 Series
Routers (Modular)
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
1-6
Chapter 1
lists the topics covered by these hardware documents.
Document Organization
Introduction to Cisco 1800 Series Routers (Modular) Hardware Documentation
Description
Describes the features and specifications of
the Cisco 1841 router and the Cisco 1861
ISR.
Describes safety recommendations, site
requirements, required tools and equipment,
and includes an installation checklist.
Provides information about cables needed to
install your Cisco 1841 router and
Cisco 1861 ISR.
Describes how to install your Cisco 1841
router on a desktop and how to mount your
Cisco 1861 ISR on a wall or in a rack.
Describes how to connect your Cisco 1841
router and your Cisco 1861 ISR to a power
source and to networks and external devices.
Describes how to power up your Cisco 1841
router and your Cisco 1861 ISR and perform
an initial configuration to provide network
access.
Describes how to isolate problems, read
LEDs, and interpret messages.
Describes the procedures for installing the
various types of interface cards in external
chassis slots.
Describes how to install or upgrade modules
that are located within the router, such as
memory modules and AIMs.
Describes hardware installation procedures
for the external CompactFlash memory card.
OL-5876-03