Removing Bread; Cleaning - Hamilton Beach HomeBaker 29881 Use & Care Manual

840194101 ENv01.qxd:Layout 1

Removing Bread

Bread pan and baking chamber will be hot and
oven mitts should be used. Remove the bread
pan by lifting the handle and turning it counter-
clockwise to unlock it from the base of the
chamber.
Carefully shake the bread upside down until
the loaf falls out of the bread pan. Allow to
cool on a wire rack for 10 minutes before
slicing.
TIP: If the kneading paddle comes out in the
loaf, remove it with a spatula or small utensil.

Cleaning

1
To clean kneading paddle:
If the kneading paddle is difficult
to remove from the bread, add
water to the bottom of the bread
pan and allow to soak for up to
1 hour.
Wipe the paddle carefully with a
damp cloth. The kneading paddle
is dishwasher-safe.
12
7/30/10 8:38 AM Page 12
When baking is complete, the unit will switch to the Keep Warm setting for up to 1 hour.
Press and hold the START/STOP button for 2 seconds to end this cycle before removing
bread pan.
Electrical Shock Hazard.
w WARNING
Disconnect power before cleaning. Do not immerse cord, plug, or housing in any liquid.
Allow breadmaker to cool down completely before cleaning.
2
To clean bread pan:
Remove the bread pan by turning
it counterclockwise. Wipe inside
and outside of bread pan with
a damp cloth. Do not use any
abrasive agents, in order to protect
the nonstick coating. The bread
pan must be dried completely
before installation.
NOTE: The bread pan and kneading
paddles are dishwasher-safe. The
outside of the bread pan and base
may discolor. This is normal.
Slicing
Allow to cool for 10 minutes and slice with a bread knife.
Storing Homemade Bread
Fresh-baked bread is best when consumed as soon as possible.
To store, wrap cooled loaf in foil or a plastic bag to preserve
freshness. Bread can be frozen for up to 6 months.
3
To clean housing and top lid:
After use, allow unit to cool. Use
a damp cloth to wipe lid, housing,
baking chamber, and interior of
viewing window. Do not use any
abrasive cleaners for cleaning,
since this will degrade the high
polish of the surface. Never
immerse the housing into water
for cleaning.
4
Before the breadmaker is packed
for storage, ensure that it has
completely cooled down, is clean
and dry, and the top lid is closed.