Connecting To A Tv (Video) - Good Quality - Samsung BD P4600 - Blu-Ray Disc Player User Manual

coNNecTING To a TV (VIDeo) - GooD QuaLITy

1. Using video/audio cables, connect the VIDeo (yellow) / auDIo (red and white) ouT terminals on the bottom
of the Blu-ray Disc Player to the VIDeo (yellow) / auDIo (red and white) IN terminals of your TV.
2. Turn on the Blu-ray Disc Player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears
on the TV screen.
If you have set the remote control to operate your TV (see pages 20~21), press the TV Source button on
~
the remote control and select VIDEO as the external source of the TV.
M
`
Noise may be generated if the audio cable is placed too close to the power cable.
`
If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 28~30)
`
The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
`
If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
Blu-ray Disc Player.
`
The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.
(See page 44)
J
`
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
Red White Yellow
Audio/Video cable
English _