Plug And Play Setup - TYAN TSUNAMI AT Manual

RTC Wake-up
If Enabled, this option allows you to set an hour and minute for the system to
wake up. The next two fields allow you to choose the wake up time. Note that
the time fields will not be available if this option is set to Disabled. In order for
this wake up function to work, the system must have been brought up at least
past the POST before it was last shut down (i.e. if you turn the system off
before the POST, the registry will not be set, and the system will not be able to
wake up using this function). The settings are Enabled or Disabled.

Plug and Play Setup

Choose PCI/Plug and Play Setup from the AMIBIOS Setup screen to display
the PCI and Plug and Play Setup options, described below.
(c)1998 American Megatrends, Inc. All Rights Reserved
Advanced
Advanced CMOS Setup [ Enter ]
Advanced Chipset Setup [ Enter ]
Power Management Setup [ Enter ]
Plug and Play Setup [ Enter ]
Change Language Setting
ESC:Exit Enter:Select F5:Setup Defaults F6:Original Values F10:Save & Exit
S1830 Tsunami AT
AMI BIOS EASY SETUP UTILITY Ver.1.16
Peripheral Setup [ Enter ]
English
55
Setup Help
Configure PCI / Plug
and Play features
-
Previous Item
¯
Next Item
® ¬ Select Menu