Mounting The Motherboard - TYAN TRINITY I845 User Manual

2.11 Mounting the motherboard

Your chassis may include mounting hardware. If mounting hardware was included, you can use
the following examples to help you in stalling your motherboard into the chassis.
If your chassis has the studs integrated into the chasses wall, then you would only need to use
screws (possibly included with your chassis) to install the motherboard. See examples (Figure 2.0,
shown below for more details.
If the chassis includes mounting hardware without the studs pre-installed, then you will need to
install the motherboard using the mounting hardware as shown in the examples below.
Remember not to over tighten any of the screws, or you may risk breaking internal traces in the
surrounding area, or damage the motherboard in some other way.
Other examples of how to install your motherboard using other hardware (that may or may not
have been included with your chassis) are shown below.
T ype of hardware
The diagrams above are only representative of a few solutions for installing a
NOTE motherboard into the chassis. The installation procedure for installing your
One solution for installin g motherboard
motherboard into the chassis may differ.
screw
motherboard
base
stud
chassis wall
motherboard
base
standoff
chassis wall
motherboard
base
standoff
chassis wall
17
http://www.tyan.com
Another solution