TYAN TOMCAT N3400B Manual page 46

3.7.4 Super IO Configuration Sub-Menu
You can use this screen to select options for the Super I/O settings. Use the
up and down arrow (á/â) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option
Main Advanced
Configure SCH5017 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Chassis Intrusion Detect
Watchdog Mode
Feature
Configure SCH5017 Super IO Chipset
Onboard Floppy
Controller
Serial Port1 Address
Serial Port2 Address
Chassis Intrusion
Detect
Watchdog Mode
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[Disabled]
[Disabled]
Option
Disabled
Allow BIOS to enable or disable the floppy
controller.
Enabled
3F8 IRQ4
3E8 IRQ4 Allow BIOS to select Serial Port1 Base
Addresses.
2E8 IRQ3
Disabled
2F8 IRQ3
3F8 IRQ4 Allow BIOS to select Serial Part2 Base
Addresses.
2E8 IRQ3
Disabled
Enable/Disable the function of chassis
Disabled
intrusion detection. When chassis open
event is detected, BIOS will record the
Enabled
event.
Disabled
Enabled
46
Security Chipset
Allows BIOS to enable
or disable Floppy
Controller.
? ? Select Screen
? ? Select Item
+/-
F1
F10 Save and Exit
ESC Exit
Description
Enable/Disable watchdog mode.
Exit
Change Option
General Help