TYAN TOMCAT N3400B Manual page 41

3.7.2 IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and
<Minus> keys to change the value of the selected option.
Main Advanced
IDE Configuration
Onboard IDE Controller
Serial-ATA Devices
4nVidia RAID Setup
4Primary IDE Master
4Primary IDE Slave
4SATA0 (Dev5, Func0)
4SATA1 (Dev5, Func0)
4SATA2 (Dev5, Func1)
4SATA3 (Dev5, Func1)
4SATA4 (Dev5, Func2)
4SATA5 (Dev5, Func2)
Hard Disk Write Protect
IDE Detect Time Out (Sec)
Feature
IDE Configuration
Onboard IDE Controller
Serial-ATA Devices
Hard Disk Write Protect
IDE Detect Time Out
(Sec)
BIOS Setup Utility
PCI/PnP Boot
[Enabled]
[Device 0/1/2]
[Disabled]
[35]
Option
Enabled
Enable/Disable onboard IDE controller.
Disabled
Device 0/1/2
Disabled
Configure serial ATA devices.
Device 0
Device 1/1
Enable/Disable device write protection.
Disabled
This will be effective only if device is
Enabled
accessed through BIOS.
0~35 Select the time out value for detecting
(at 5 interval) ATA/ATAPI device(s).
41
Security Chipset
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
? ? Select Screen
? ? Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Exit