Advanced Chipset Control - TYAN TOMCAT I7230A User Manual

Tomcat i7230A S5160

3.3.1 Advanced Chipset Control

This section allows you to fine tune the chipset configuration.
ECC Condition
This feature is used to select ECC Error condition to be detected.
Multiple bit / None / Single bit / Both
ECC Error Handler
When an ECC error occurs, it generates an interrupt. This feature is used to select the type of
interrupt to report.
SMI / NMI / SCI
Parallel ATA
This feature is used to enable the PATA function.
Enabled / Disabled
Serial ATA
This feature is used to enable the SATA function.
Enabled / Disabled
Native Mode Operation
This feature is used to choose Native Mode for ATA. However, certain OS is not supported
under Native Mode.
Auto / Serial ATA
SATA Controller Mode Option
This feature is used to select SATA controller mode. In "compatible mode", SATA and PATA
drives are auto-detected and placed in Legacy mode. In "Enhanced (non-AHCI) mode", SATA
and PATA drives are auto-detected and placed in Native IDE mode.
Compatible / Enhanced (non-AHCI)
32
http://www.tyan.com
Chapter 3: BIOS Setup