Charge The Battery; Get Started - Nokia BH 104 - Headset - Over-the-ear User Manual

Get started

The headset contains the following
parts shown on the title page:
indicator light (1), earloop (2), volume
keys (3), answer/end key (4), earpiece
(5), power key (6), charger connector
(7), and microphone (8).
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.

Charge the battery

Before charging the battery, carefully
read "Battery and charger
information".
Warning: Use only chargers
approved by Nokia for use
with this particular model. The use of any
other types may invalidate any approval
or warranty, and may be dangerous.
When you disconnect the power cord of
any accessory, grasp and pull the plug,
not the cord.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector. The red
indicator light is displayed during
charging. Charging the battery
fully may take up to 2 hours.
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset, then from the
wall outlet.
The fully charged battery has power
for up to 10 hours of talk time or up to
200 hours of standby time.
ENGLISH