Table of Contents
Advertisement
continuously raise or lower the
volume. two beeps indicates that the
volume is at minimum or maximum.
Mute Your Microphone
to temporarily mute voice
transmission, briefly press the power
button. Press the power button again
to turn mute off.
a high beep followed by a low beep
indicates that mute is on. the
headset will emit a single beep
every 30 seconds to remind you that
mute is on. a low beep followed by a
high beep indicates that mute is off.
!
Hearing Loss
extended exposure to high
volumes when using a headset
may result in temporary or
permanent hearing loss.
Low-Power Warning
the headset emits the following
low-power warnings:
• 2 audible tones: about 30
minutes of battery life remaining.
• 3 audible tones: about 5 minutes
of battery life remaining.
CLEANING YOUR HEADSET
Clean only with a dry or slightly
damp cloth. using cleaning solutions
may damage your headset.
CARING FOR YOUR HEADSET
to prevent damage to your product,
store it in a dry location where it will
not be crushed by heavier items. do
not leave the product or its
accessories in places where they
could cause people to slip or trip. do
not sit or step on it.
TROUBLESHOOTING
if you encounter problems, try the
possible solutions indicated below.
Wireless Headset Does Not Work
to turn on the wireless headset,
press the headset's power button. to
connect the wireless headset to your
console, press the connect button on
the console, and then press and hold
the connect button on the headset.
You must press the connect buttons
within 20 seconds of each other. if
you've done this and the headset
does not work:
11
Advertisement
Table of Contents
