Assemble Wheels - Delta A08184 Instruction Manual

Assemble Wheels

It will be necessary to brace or support one side of the
outfit when installing the wheels because the compressor
will have a tendency to tip.
1. Attach wheels with shoulder bolts and nuts as shown.
Tighten securely. NOTE: The outfit will sit level if the wheels are properly
2.
installed.
The wheels and handle do not provide adequate clearance,
stability or support for pulling the unit up and down stairs
or steps. The unit must be lifted, or pushed up a ramp.
Assemble Rubber Feet
1. Attach rubber feet with the screws provided as shown in previous figure.
2. Tighten securely.
Nut
Wheel
9- ENG
Rubber Feet
Screw
Shoulder Bolt
A08184