Table of Contents
Advertisement
Drive specification
Operational Shock (max at 2 msec)
Non-Operational Shock (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power
Idle* (bels)
Operational, CE seeks (bels)
Operational, PVR seeks (bels)
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles (25°C, 50% rel. humidity)
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
DB35 Series 7200.2 Product Manual, Rev. D
ST3300822ACE
ST3250824ACE
63 Gs
350 Gs
5-22 Hz: 0.25 Gs, Limited displacement
22-350 Hz: 0.5 Gs
350-500 Hz: 0.25 Gs
5–22 Hz: 0.25 Gs, Limited displacement
22-350 Hz: 5.0 Gs
350-500 Hz: 1.0 Gs
2.67 (typical)
2.82 (max)
2.80 (typical)
2.90 (max)
2.68 (typical
2.80 (max)
14
1 per 10
bits read
0.70%
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access
the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be asked to
provide the drive serial number, model number (or part number) and country
of purchase. The system will display the warranty information for your drive.
50,000
ST3200827ACE
7
Advertisement
Table of Contents
