Table of Contents
Advertisement
2
Intel
SROMBSASMR Hardware Installation
Requirements
•
Intel
•
A host system with an available 50-pin PCI Express* connector
•
Resource CD, which contains drivers and documentation
•
SAS or SATA 3.0 hard drives
•
Four provided SAS/SATA cables (for cable requirements, see step 6 in
the RAID
Note: Intel Corporation strongly recommends using an uninterruptible power supply (UPS).
Installing the RAID Module
To install the RAID Module, follow these steps:
1. Turn off the power to the system, all drives, enclosures, and system components.
Remove the power cord(s).
2. Remove the server cover. For instructions, see your server system documentation.
3. Insert the three snap standoffs into the matching holes in the server/workstation
board. To locate the matching module card slot on your server/workstation board,
see your server/workstation board documentation.
Intel® Integrated RAID Module SROMBSASMR Hardware User's Guide
®
Integrated RAID Module
®
Integrated RAID Module SROMBSASMR, with the provided standoffs
Module")
"Installing
7
Advertisement
Table of Contents
