Receiving A Call; Call Waiting; During A Call; Other Functions - Kenwood KCA-BT300 Instruction Manual

Receiving a call

Answering a Phone Call
Press the [AUD] button.
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [ATT] button for at least 1 second.

Call waiting

Answering Another Incoming Call with the
Current Call Suspended
1. Press the [AUD] button.
2. Turn the [AUD] knob or push it towards up or
down. Select the "ANSWER" display.
3. Press the [AUD] button.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the [AUD] button.
2. Turn the [AUD] knob or push it towards up or
down. Select the "REJECT" display.
3. Press the [AUD] button.
Answering the Waiting Call after Terminating the
Current Call
Press the [ATT] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the [AUD] button.

During a call

Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode (
Press the [38] button.
Switches between Private talk ("PRVT") or Hands-free
talk when pressed.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.

Other functions

Clearing the Disconnection Message
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
Press the [38] button for at least 1 second. You can
switch between the Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
2-1. Press the [SEARCH] button.
2-2. Select the number to memory by turning the
[AUD] knob.
2-3. Press the [AUD] knob for at least 1 second.
3. Exit the dialing method selection mode
Press the [SEARCH] button.
Items Set in Function control
* To enter the Menu mode, press the [AUD] knob for
at least 1 second.
Display
"DVC REGIST"*
"S-DVC SELECT"* Allow registration of a special device that cannot be
"PHONE SEL"*
"AUD SEL"*
"SMS
DOWNLOAD"
"SMS INBOX"
"VOICE TAG"
"VOICE RECOG"
"DEVICE DEL"*
"DVC STATUS"*
"PIN EDIT"*
"AUTO ANS"
"MIC GAIN"
"NR LEVEL"
)
"SP SEL"
"CALL BEEP"
"BT F/W UPDATE" For how to update the firmware, access our website.
Setting overview
Register a Bluetooth device (pairing). See page 20.
registered normally. See page 21.
Select a cell-phone subject to hands-free connection.
See page 22.
Select the audio player to be connected. See page 22.
Download a short message. See page 24.
Display the received short message. See page 24.
Register the voice tag for "voice recognize". See page 22.
Make a voice dialing call. See page 8.
Cancel registration of the Bluetooth device. See page 22.
Display the status of the Bluetooth device.
Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"OFF"/ "0s" – "99s": Answer a call automatically after
lapse of the preset time interval for automatic answer.
See page 30.
"–2" – "0" – "+2": Adjust the sensitivity of the
microphone for a telephone call.
"–2" – "0" – "+2": Reduce the noises generated by
the surrounding environment without changing the
microphone volume.
"Front"/ "F-R"/ "F-L": Specify the voice output speaker.
See page 30.
"ON"/ "OFF": Output a beep from the speaker when a
call comes in. See page 30.
http://www.kenwood.com/cs/ce/bt/
English
| 9