.A.WARNING • If you experience problems during installation, To prevent injury or fire, take the following consult your Kenwood dealer. precautions: • If the unit does not seem to be working right, try • To prevent a short circuit, never put or leave any pressing the reset button on the control unit first.
Notes Connectable Models NOTE When initially activating your subscription, have changed your subscription, or if SIRIUS itself has updated streaming broadcast service, automatic 2007 models reselection of reception operates by following the *KDC-X991, *KDC-X891, *KDC-X791, *KDC-MP735U, current channel setting. *KDC-MP635 At this time, audio reception may be momentarily interrupted.
Operations Press the [FM] button. How to read Each time the button is pressed, the preset band The operation method differs depending on the switches between the SR1, SR2, SR3 and SR4. model of the control unit. For the model with a Control knob, perform the operation steps marked with For other models, Tuning...
Operations Channel Scan Switching Display Every receivable channel is checked for 10 seconds. When you are listening to the Sirius satellite radio, you can switch over the display information as Start Channel Scan follows. Press the [AUTO] button for at least 2 seconds. For operations, see the <Switching Display>...
..41 If your car is not prepared for this special connection- system, consult your Kenwood dealer. Make sure that all wire connections are securely made by inserting jacks until they lock completely. Do not let unconnected wires or terminals touch metal on the car or anything else conducting electricity.
Connecting Wires Terminals To Kenwood disc changer/ SIRIUS Control unit control input • When using with the KCA-BTl 00 or KTC-HR1 OOTR, connect to it. KCA-SRSO SIRIUS connection wire (AccessoryG)) KCA-SR5\) (Front side) (Rear side) SIRIUS Universal • Do not connect any unit other than the Tuner or Portable SIRIUS tuner.
Installation & Installation using the velcro tapes Install the unit in a well-ventilated location and do not place objects on top of it. When installing to the car, the unit should be securely fastened at a location that will not interfere with driving. When making a hole in the chassis, check that the gas tank, break pipe, wire harness, or other part is not located on the other side, and be careful not to cause scratches.
Troubleshooting Guide If you use this for the first time, it may be The following messages are displayed when certain problems are occurring difficult to receive signals in the beginning. in your system. Take the recommended In such a case, leave the SIRIUS source ON actions.
Specifications Specifications subject to change without notice. General Operating voltage allowable) (11 - 16V : 14.4 V Current consumption : 420 mA Installation Size (W x : 127 1-3/8 2-1/16 inch Weight Ibs) : 0.17 kg (0.37 English...