Volvo C30 Owner's Manual page 93

04 Interior
Cargo area
04
Locks and support pins
– Locate the front section of the two support
pins behind the active locks (A) on both
sides.
– Align one of the rear locks at (B) and
extend the lock plunger by moving the
lock button forwards.
– Align the other rear lock in the same way
and extend the lock plunger by moving the
lock button forwards.
– Extend the front lock plungers, one at a
time so that they lock in their active
locks (A).
The cargo cover hatch can be raised during
loading.
92
NOTE
The cargo cover has no load-securing func-
tion Never load anything on top of the cargo
cover. For securing loads, see page 146.
Removing the cargo cover
– Retract the front lock plungers at (A) to
their end positions by pulling back the lock
buttons on both sides.
– Retract the rear lock plungers at (B) to
their end positions by pulling back the lock
buttons on both sides.
– Lift up and turn the cargo cover before
lifting it from the cargo area.
Raising the floor hatch
Without cargo cover
Raise the floor hatch and secure it in the lugs
on both sides.
With hard cargo cover
Raise the hatch on the cargo cover. Then
raise the floor hatch and hook it into the hook
located under the cargo cover.