PROEL BM100 Instruction Manual page 9

Operating suggestions
•
If the microphone is placed too close to speaker or its capsule is oriented towards a speaker,
it could generate feedback (Larsen effect). Avoid placing the microphone too close to the
speaker, and avoid orienting its capsule toward the speaker. IF, despite these practises, you
hear feedback, please lower speaker volume.
•
It's important to keep the anti-pop foam clean; foreign particles on the foam could modify
frequency response. Periodically wash the anti-pop foam using warm water with mild soap,
rinse the foam with clean water, then let the foam dry thoroughly before placing it again on the
microphone.
•
Due to the microphone's very high sensitivity, be careful the microphone isn't dropped and
avoid shock, as it could be damaged.
•
In order to maintain sensitivity and performance, avoid exposing the microphone to moisture
or high temperatures.
Risposta in frequenza
Proel S.p.A. pursue a policy of continuous research and development. Proel S.p.A. reserve the right to
modify product circuitry and appearance at any moment, without prior notice.