Advertisement
Available languages
Available languages
8. How to use Proel conference system
Power the main central unit CONF, the led
number of microphone stands to able contemporaneously and in accordance
with the selection choice throughout LIMIT SWITCH (fig1. rif4). Such selector
allows to set both: the able quantity of microphone stands to operate
contemporaneously and the operating mode (AUTO or normal). For such
setting steps revert to paragraph 3. Set microphones and loudspeakers volume
control in accordance with the requirement. The system is ready for use, press
Key
MIC (fig.3 ref.5 - fig.4 ref.5) of Chairman microphone or delegate
microphone stand, the lighting ring is ON status and it is possible to start the
conference/speech. The next MIC key pressing and if
activated, the microphone is disabled. Chairman microphone stand is priority
key equipped. In fact when PRIORITY key is pressed all the remaining
microphone stands involved by the configuration will be disabled.
9. Technical specifications
Model
Delegate/Chairman interface 8P-DIN socket / n°3 BUS
Frequency response (-3dB)
S/N Radio
Weight
Dimensions (W x H x D)
The product is in compliance with Directive 89/336/EEC (Electromagnetic Compatibility)
and following modifications 92/31/EEC and 93/68/EEC, as the following standards:
EN 50082-1:1997, EN 55013:1990, EN 55020:1994
it is also in compliance with Directive 73/23/EEC (Low Voltage)
and following modifications 93/68/EEC, as the following standard:
(fig1. ref.11) will indicate the
CONF
100-12,5KHz
>70 dB
2,5Kg
483x44x200
AUTO function is
Advertisement
