Palsonic MODEL 5910PF Owner's Manual page 10

3. MANUAL SEARCH
If AUTO - SEARCH cannot preset the desired channels,
or you want to preset the desired channels one by
one with the preferred channel numbers - please make
use of MANUAL SEARCH.
3.1 Press the menu item select button
MANUAL SEARCH (the caption on the screen are
red).
3.2
Press the or
of MANUAL SEARCH.
3.3 Press the or button to choose POSITION.
(the caption on the screen are red) , press the
button to select the needed program number (from
00 ~ 99.
Note:
Push the or
within 0.7 of a second. Push and hold the
button for more than 0.7 of a second to select a
decimal number.
Press the or button to select SEARCH, push
3.4
the button to search channels from current channel
to higher channel. Push the
channels from current channel to lower channel.
When a channel is located, the searching stops, this
channel is then memorised with a present channel
number.
Note: You can also make use of band selection to quicken
the searching process in your desired band. Pressing
the or button moves the band to the next step
in the sequence below.
VHFL VHFH
or to select
button to enter into the sub - menu
button to select a channel number
button to search
UHF
Press the
to select MANUAL
SEARCH
Press the
to display the menu of
MANUAL SEARCH
MANUAL SEARCH
or
Press the
to select SEARCH
or
MANUAL SEARCH
Press the
select the wanted channel
number
Press the
select SEARCH
Press the button
it begins searching
POSITION 22
SEARCH
llllllllllllll
- - - - -
8
or button
SEARCH
MANUAL SEARCH
AUTO SEARCH
or button
or button
POSITION 10
button to
POSITION 22
or button
SEARCH
When a station is searched
the searching stops
SEARCH