Main features 59cm pure flat picture tube PAL/NTSC/SECAM Multi - System Hyperband ENGLISH/CHINESE on - screen menu display Surround sound and super woofer Three groups of S-VIDEO/VIDEO/AUDIO input terminals and one group of MONITOR output terminals Auto/manual search OFF timer and ON timer, Auto-Power-Off & blue background display Advanced 5D picture improvement circuit 1.
Congratulations on your purchase of this colour PURE FLAT Hi -Vision Palsonic television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference.
NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike.
Installation and appearance Antenna connection To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied)
Appearance Front view POWER SWITCH VOLUME UP VOLUME DOWN Headphone socket (3) Video 3 input terminals CHANNEL DOWN {S-VIDEO, VIDEO, CHANNEL UP AUDIO L/MONO, R} MENU TV/AV SYSTEM Note: Functions of MENU, TV/AV, SYS, CH , are also provided to the remote controller. Back view MONITOR output terminals Antenna input...
Operation Switching on/off 1. Push the main power switch on, if the set is in Standby mode, the power indicator is red; If there are pictures appearing on the screen, the indicator is yellow. 2. If no picture appears on the screen, push the power button on the remote controller to turn the set on, the indicator turns to yellow.
Presetting the channels Press the MENU button to display the main menu There are two ways to preset channels: to preset channels automatically and to preset channels manually. MENU Below we will describe how to preset the channels by making use of the menu. 1.
Page 10
Press the button 3. MANUAL SEARCH to select MANUAL If AUTO - SEARCH cannot preset the desired channels, SEARCH or you want to preset the desired channels one by one with the preferred channel numbers - please make SEARCH use of MANUAL SEARCH. MANUAL SEARCH Press the menu item select button to select...
Page 11
When you want to store and memorise another MANUAL SEARCH channel with another position, repeat steps 3.3, 3,4. POSITION 14 4. Skip unwanted program numbers After presetting the channels, you can skip unwanted Press the button to program numbers to select your desired channels. select SKIP Repeat steps 3.1 to 3.3 to select the unwanted pro- gram position of the unwanted channels .
Press the SYS button 6. The setting of colour and sound system Press the SYS button, the screen will display colour and sound system. SYSTEM COLOR AUTO If the displaying colour is abnormal, press the button to select COLOR, then press the button to select the right colour system.
Picture and sound adjustment Press the button, you can quickly select two modes of picture and sound quality standard: STANDARD One is standard mode ( on the screen displays (STANDARD) ; The other is personal select mode (on the screen Press the button displays "MEMORY").
Page 14
Press the MENU button If the TV signals are too weak and you can not watch button the program normally, blue background will appear automatically to overcome the picture. If you insist MENU on watching the program, you can select "BBK" PICTURE item to shut off the blue background.
Page 15
Note: During the process of picture and sound adjustment, every time you SOUND MEMORY press the button, STANDARD/ SURROUND OFF S. WOOFER OFF MEMORY is displayed on the screen S. WOOFER 50 alternatively. When picture and tone quality are adjusted to your desired Press the button to Press...
Other functions 1.1 BBK (blue background) ON/OFF When there are no inputs signals or the receiving channels are weak, it you have selected BKK ON, the blue background will appear on the screen. Otherwise spots or weak signals will be displayed on the screen. When adjusting, press MENU button to enter into the main menu, press the button to select PICTURE, press the button to enter into the sub-menu of...
Page 17
2.2. 2 Press the button to select ON TIME. menu of TIMER Pressing the button set ONCE/EVERY ON TIME. Every time you press the button , it TIMER will change in the sequence of OFF EVERY ON TIME OFF ONCE EVERY..
External Equipment Connections The following describes how to use and connect the TV with other equipment. Refer to the owner's manual of the other equipment to be connected as well. 1. To Connect to AV input You can video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound.
Page 19
To select the input press the VIDEO button on the TV set or the AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays programme number, or press direct channel select button or the CH button.
Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Check the following items Symptoms No power, red indicator is not lit up Be sure the power cord is plugged in. Contrast, colour, tint are not correctly Poor colour, poor tint adjusted...