Identifying The Parts (Back) - Teac SR-LUXi Owner's Manual

Identifying the Parts (Back)

FM antenna
While in FM mode,
tune in an FM station
and extend the
antenna lead to find
the best position for
reception.
AUX IN
Analog 2-channel audio
signals can be input using
the supplied stereo mini-
plug cable.
Connect this jack to the
output of the audio player.
Page 18
PHONES
To listen with headphones, first lower the volume level to the
minimum. Then, insert the headphones plug into the
PHONES jack and adjust the volume.
The speakers of this unit will make no sound when
headphones are plugged in.
CAUTION
Do not connect headphones with the PHONES jack while
wearing them. Moreover, do not disconnect headphones or
turn the unit on or off while wearing them. Very loud sound
could be output from the headphones.
AVOID DAMAGING YOUR HEARING - Do not put on
headphones until after plugging them in.
10
Read the instructions of each component you intend to use with this unit .
<
Be sure to connect each plug securely . To prevent hum and noise, do not
<
bundle the connection cords .
WAKE UP
Set the amount of time
that the light takes to
gradually brighten when
using the wake up timer.
Page 23
DST
Use this switch to
set daylight saving
time.
CLOCK ADJ
Use this button to
adjust the clock.
Next page
DC IN
Connect the supplied
AC adapter (PS-M0630
or PS-M0630US) to this
jack. Then, connect the
connector of the power
cord to the AC adapter.
After all other connec-
tions are complete,
connect the power
cord's plug to an AC
wall socket.
Use the supplied AC
adapter (PS-M0630 or
PS-M0630US). Do not
use any AC adapter
other than the one
included with this unit.
AC wall socket
CAUTION