Sharp GX30 Service Manual page 82

OPEN
(G2) x 2
1.7 x 5 mm
(G1) x 2
(G3) x 2
2
SLIDE
1
UP
Jig
(G4) x 1
3
1 Insert a jig into the gap and slightly lift up the back cabinet (display) assembly.
2 Insert jigs into the space.
Slide them in the direction of the arrow to release 4 hooks (G3).
3 Being careful with the claw, release the hook (G4).
OPEN
To unhook the main PWB-A,
insert a small flat head screwdriver
and lever it up as illustrated.
Back Cabinet (Display)
Front Cabinet
(Display)
(G2) x 2
1.7 x 5 mm
(G1) x 1
Back Cabinet (Display)
CLOSE
(G3) x 2
2
SLIDE
Main PWB-A Unit
(H1) x 2
Front Cabinet
(Display)
Main PWB-A
Hook
Minus
Driver