Biostar TPOWER N750 Setup Manual page 13

PEX16-1: PCI-Express Gen2 x16(x16/SLI x8 Speed) Slot
PCI-Express 2.0 compliant.
-
- Maximum theoretical realized bandwidth of 8GB/s(4GB/s SLI)
simultaneously per direction, for an aggregate of 16GB/s(8GB/s SLI) totally.
- PEX16-1 slot is reserved for graphics or video cards. The design of this
motherboard supports dual PCI-Express graphics cards using NVIDIA's SLI
technology with multiple displays. When using SLI, this slot is master and
runs with x8 speed.
- To configure for SLI, please refer to the instructions of configuring
JPSLI1~JPSLI9.
PEX16-2: PCI-Express Gen2 x16(NC/SLI x8 Speed) Slot
- PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 4GB/s simultaneously per
-
direction, for an aggregate of 8GB/s totally.
- PEX16-2 slot is reserved for graphics or video cards. The design of this
motherboard supports dual PCI-Express graphics cards using NVIDIA's SLI
technology with multiple displays. This slot is slave when using SLI. If
PEX16-1 is set to x16 speed, then PEX16-2 would not be functional.
PEX1_1: PCI-Express Gen2 x1 Slot
PCI-Express 2.0 compliant.
-
- Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.
- PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.
- 2X bandwidth over the PCI-Express 1.0 architecture.
TPower N750
PEX16-1
PEX1_1
PEX16-2
11