Pci Latency Timer; Palette Snooping; Pci Ide Busmaster - Biostar TPOWER I55 - BIOS Bios Manual

Hide thumbs Also See for TPOWER I55 - BIOS:
Table of Contents

Advertisement

TPower I55 BIOS M anual

PCI Latency Timer

T his item controls how long a PCI device can hold the PCI bus bef ore another takes
over. T he longer the latency, the longer the PCI device can retain control of the bus
before handing it over to another PCI device.
Options:
64 (Default) / 32 / 96 / 128 / 160 / 192 / 224 / 248
Allocate IRQ to PCI V GA
T his item allows BIOS to choose a IRQ to assign for the PCI VGA card.
Options:
Yes (Default) / No

Palette Snooping

Some old graphic controllers need to " snoop" on the VGA palette and then map it to
their display as a way to provide boot inf ormation and VGA compatibility. This item
allows such snooping to take place.
Options:
Disabled (Default) / Enabled

PCI IDE BusMaster

T his item is a toggle for the built-in driver that allows the onbo ard ID E controller to
perform DMA (Direct Memory Access) trans fers.
Options:
Enabled (Default) / Disabled
OffBoard PCI/ISA IDE Card
Some PCI IDE cards may require this to be set to the PCI slot number that is holding
the card.
Options:
Auto (Default) / PCI Slot1 ~ 6
OffBoard PCI/ISA Primary & Secondary IRQ
T his item allows you to set IRQ of non-onboard PCI/ISA IDE controller adapter.
Options:
Disabled (Default) / INT A / INTB / INT C / INTD / Hardwired
IRQ3/4/5/7/9/10/11/14/15
T hese items will allow you to assign each system interrupt a type, depending on the
type of device using the interrupt.
to assign automatically.
Options:
Available (Default) / Reserved
T he option "Available" means the IRQ is going
24

Advertisement

Table of Contents
loading

Table of Contents