Biostar TP43 HP - BIOS Manual page 26

Hide thumbs Also See for TP43 HP - BIOS:
Table of Contents

Advertisement

TP45 HP/TP43 HP BIOS M anual
Full Screen LOGO Disaply
T his item allows you to enable/disable Full Screen LOGO Show function.
Options:
Enabled (Default) / Disabled
AddOn ROM Display Mode
T his item sets the display mode for option ROM.
Options:
Force BIOS (Default) / Keep Current
Bootup Num-L ock
Selects the NumLock State after the system switched on.
Options:
ON (Default) / OFF
PS/2 Mouse Support
T his BIOS featu re det ermines i f the BIOS should reserv e IRQ12 for the PS/2 mouse
or allow other devices to make use of this IRQ.
Options:
Auto (Default) / Enabled / Disabled
Wait for 'F1' If Error
T his BIOS feature controls the system's response when an error is detected during
the boot sequence.
Options:
Enabled (Default) / Disabled
Hit 'DEL' Message Display
T his BIOS feature allows you to control the display o f the Hit " DEL" to enter Setup
message during memory initialization.
Options:
Enabled (Default) / Disabled
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
to Enabled, this item allows the option ROMs to trap interrupt 19.
Options:
Disabled (Default) / Enabled
25
When set

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tp45 hpTp45exe

Table of Contents