Table of Contents
Advertisement
TP45 HP/TP43 HP BIOS M anual
USB Dev ice Wakeup from S3/S4
T his item allows you to enable or disabled the USB resume from S3/S4 function.
Options:
Disabled (Default) / Enabled
High Performance Event Timer
T his item allows you to enable or disabled the HPET.
Options:
Disabled (Default) / Enabled
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable i f applicable.
Options:
Disabled (Default) / Enabled
Resume On RTC Alarm
When " Enabled", you can set the date and time at which the RT C (real-time clock)
alarm awak ens the system from Suspend mode.
Options:
Disabled (Default) / Enabled
RTC Alarm Date (Days)
You can choose which date the system will boot up.
RTC Alarm Time
You can choose the system boot up time, input hour, minute and second to specify.
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this function will work.
Active State Power-Management
T his item sets the ASPM configuration for the PCI Express devices b efore the
operating system boots. T his f unction is for OS which does not support ASPM.
Options:
Disabled (Default) / Enabled
15
Advertisement
Table of Contents
