Biostar TA785G3 HD Setup Manual page 30

Motherboard Manual
Notices:
Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the
selected CPU model.
B. Memory Integration Test (M.I.T.)
This function is under "Overclocking Navigator Engine" item.
MIT allows users to test memory compatibilities, and no extra devices or
software are needed.
Step 1
The default setting under this item is "Disabled"; the condition parameter should
be changed to "Enable" to proceed this test.
Main Advanced
T-Series Settings
Notice: Please Clear CMOS if system no display
after overclocking.
OverClock Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum
> Over-Voltage Configuration
> CPU FID/VID Control
> Hyper Transport Configuration
> DRAM Timing Configuration
> G.P.U Phase Control
Integrated Memory Test
Main Advanced
T-Series Settings
Notice: Please Clear CMOS if system no display
after overclocking.
OverClock Navigator
=========== Automate OverClock System ===========
Auto OverClock System
============ Manual OverClock System ============
CPU/HT Reference Clock (MHz) [200]
Spread Spectrum
> Over-Voltage Configuration
> CPU FID/VID Control
> Hyper Transport Configuration
> DRAM Timing Configuration
> G.P.U Phase Control
Integrated Memory Test
Step 2
Save and Exit from CMOS setup and reboot the system to activate this test.
Run this test for 5 minutes (minimum) to ensure the memory stability.
Step 3
When the process is done, change the setting back from "Enable" to "Disable"
to complete the test.
28
BIOS SETUP UTILITY
PCIPnP Boot
[Normal]
[V6-Tech Engine]
[Disabled]
[Disabled]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
↓
BIOS SETUP UTILITY
PCIPnP Boot
[Normal]
[V6-Tech Engine]
[Disabled]
[Enabled]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Chipset T-Series Exit
Options
Enabled
Disabled
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
Exit
ESC
Chipset T-Series Exit
Options
Enabled
Disabled
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
Exit
ESC