Table of Contents
Advertisement
TA790GXB3/TA785-A3 BIOS Manual
Bank Interleaving
Bank Interleaving is an advanced chipset technique used to improve memory
perform ance. Memory interleaving increases bandwidth by allowing simultaneous
access to more than one piece of memory.
Options:
Auto (Default) / Disabled
Channel Interleaving
T his item allows you to control the DDR2 dual-channel function.
Options:
XOR of Address bits [20:16, 6] (Default) / XOR of Address bits
[20:16, 9] / Address bits 6 / Address bits 12 / Disabled
Enable Clock to All DIMMs
T his item determines
(Electromagn etic Interference) and reduce power consumption by turning off
unoccupied or inactive DIMM slots.
Options:
Disabled (Default) / Enabled
MemClk Tristate C3/ATLVID
T his item enables or disables the MemClk T ristate function in C3 Mode.
Options:
Disabled (Default) / Enabled
Memory Hole Remapping
T his item allows you to enable or disable the remapping of the overlapped PCI
memory above the total physical memory. Only 64-bit OS supports this function.
Options:
Enabled (Default) / Disabled
DC T Unganged Mode
T his item controls the DRAM controller ganged (128bit*1) / unganged (64bit*2)
dual-chann el operation mode.
installed, using unganged mode can still make it run in dual-channel operation.
Options:
Always (Default) / Auto
Power Dow n Enable
T his item controls the DRAM power down function.
Options:
Disabled (Default) / Enabled
whether
the BIOS should actively
If two DRAM modules with different size are
40
reduce
EMI
Advertisement
Table of Contents
