Table of Contents
Advertisement
FUNCTIONS AND CONTROLS CONT.
28.
SINGLE INDICATOR - This indicates that the player is in single play mode. Playback will stop and cue at the
beginning of the next track.
29.
PROGRAM INDICATOR - This lights when in program is selected or program play is selected.
30.
PLAY INDICATOR (
31.
LOOP, RELOOP INDICATORS - Displays when LOOP is engaged. LOOP flashes in LCD DISPLAY (8) when
playing loop.
32.
PITCH INDICATOR- Lights when PITCH (20) is engaged.
33.
PITCH DISPLAY - Displays the percentage of pitch adjustment, according to the PITCH FADER (13).
34-36. MINUTE, SECOND, & FRAME INDICATORS - Displays the running time of the current track (Elapsed,
Total, Remaining).
37.
TRACK INDICATOR - Displays which TRACK is being played.
38.
PAUSE INDICATOR (
PREPARATIONS
1. Checking the Contents
Check that the carton contains the following items:
1)
Main unit.
2)
Operating instructions (this booklet).
3)
A pair of RCA cables.
2. Installing the Units
Mount the units onto your console or place on a flat surface
3. Connections
1)
Turn off the POWER switch.
2)
Connect the RCA cables from your PRO DJ2 to the inputs on your mixer.
3)
Connect a cable via the mini jack connector on the PRO-DJ2 to a mini jack connection (A or B ) on a compatible
American DJ "Fader Q Start" mixer. (This will enable the Fader "Q" Start function - See "Q" start control pg.7)
CAUTION:
•
The player will work normally when the main unit is
mounted with the front panel within 15 degrees of
the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.
(Figure 2a)
15
GENERAL NOTES ON USE
• Avoid operating in high temperatures.
• Allow for sufficient heat dispersion when installed on a rack or case.
• Handle the power cord carefully.
• Hold the plug from the ends when unplugging the cord. Never pull the plug out from the cable.
• Keep the set free from moisture, water, and dust.
• Unplug main power when not using the unit for long periods of time.
• Do not obstruct the ventilation holes. (For units with ventilation holes.)
• Do not let foreign objects enter into the unit.
• Do not let insecticides, benzene, and thinner come in contact with the unit.
• Never disassemble or modify the unit in any way.
) - The PLAY indicators light during playback.
) - The PAUSE indicators will light during pause or cue mode.
Fig. 2a
American DJ
AUDIO • PRO-DJ2 INSTRUCTIONS MANUAL • PAGE 6
®
CAUTION:
• Be sure to use the supplied control cables. Using other
types of cable may result in unit damage.
• Be sure the power is off when connecting the control
cables, otherwise the units may not work properly.
CAUTION:
•
The LCD is designed to be clearly visible within the
angles shown in Figure 2b. Mount the control unit so
that the visual angle is within this range.
10
50
Fig. 2b
Advertisement
Table of Contents
