Location Of Seacocks And Through-Hull Fittings; Systems And Circuits; Electrical System - NorthStar 190 CC Manual

2.5. LOCATION OF SEACOCKS AND THROUGH-HULL FITTINGS

(*) Not available in all models
NORTHSTAR MANUAL

3. SYSTEMS AND CIRCUITS

3.1. ELECTRICAL SYSTEM

A main cut off switch is provided inside the aft storage by the battery box.
This cut-off switch disconnects the battery from the electrical system of
your boat.
A switch panel with fuses are provided on the console for electrical
equipment. You can control the navigation lights, pole light, livewell
pump(opt), shower pump and the bilge pumps. Since your boat is
equipped with two automatic bilge pumps, separate 3 position switches on
the console are provided for their operation. When your boat remains in
the water, leave bilge pump switches at Auto position for automatic
operation.
Above is how your electrical switch panel looks like. Fuses are found in the
fuse holders below the switches. To replace, open the fuse holder with a
screw driver and close after installing a new fuse. Periodically check your
fuses and carry spares.
8