Table of Contents
Advertisement
computers in the Filter group, select the hidden computer, then select on the sidebar
Computer details -> Visibility: Unhide.
4.4.2
7. Create a group backup task for several remote computers at once (see
Creating new group tasks
).
8. Connect to a remote computer to see the operation log, start or edit tasks for this
4.3 Managing a single remote computer
computer etc. (see
). To do so, select a computer
and click Connect.
9. Switch to the Group tasks management window for managing group tasks.
4.4.2 Creating new group tasks
You can create a disk/partition backup task or archive validation task for several remote
computers at once. File-level backup for groups of computers is unavailable.
1. In Group status or Group tasks management window, select New Group Task
on the toolbar. The Create Group Task Wizard starts to guide you through the task
creation procedure.
2. Select the type of the task: backup or validation.
3. Form a group for the current task: check computers in the list of remote computers.
4. For the backup task only: Select disks/partitions to backup. You can select any
combination of hard disks (by number, according to Windows numeration) and partitions
(by letter); or All hard disks. This setting is applied to every computer in the group, so
having a standard (similar) disks/partitions layout on remote computers would be a plus.
Select disk/partitions to backup
5. Specify the paths for the backup archives. To place every archive on its local computer,
specify Local path or select Acronis Secure Zone, if there is such a zone on every
3.3 Acronis
remote computer. For more information about the Acronis Secure Zone see
Secure Zone
. To place backups on the network, check Network path, select the target
folder and specify the username and password for access to the network drive. When
backing up to a backup server, choose Personal Backup Location or tape drive and
47
Copyright © Acronis, Inc., 2000-2009
Advertisement
Table of Contents
