Assigning A Letter To The Restored Partition; Restoring Several Partitions At Once; Setting Restore Options; Using Acronis Universal Restore - ACRONIS TRUE IMAGE 9.1 - SERVER FOR WINDOWS User Manual

These changes might be useful if you are to copy your hard disk to a new high-capacity one
by creating its image and restoring it to a new disk with larger partitions. This way of cloning
is used if it is impossible to connect the second hard disk to the server (for more details
about cloning see
2. Click Next.

6.3.9 Assigning a letter to the restored partition

1. Acronis True Image Server for Windows will assign an unused letter to a restored
partition. You can select the desired letter from a drop-down list. If you set the switch to No,
no letters will be assigned to the restored partition, hiding it from OS.
You should not assign letters to partitions inaccessible to Windows, such as to those other
than FAT and NTFS.
2. Click Next.

6.3.10 Restoring several partitions at once

1. During a single session, you can restore several partitions or disks, one by one, by
selecting one disk and setting its parameters first and then repeating these actions for every
partition or disk to be restored.
If you want to restore another disk (partition), select Yes, I want to restore another
partition or hard disk drive. Then you will return to the partition selection window (6.3.4)
again and will have to repeat the above steps. Otherwise, don't set this switch.
2. Click Next.

6.3.11 Setting restore options

1. Select the options for restoration process (that is, pre/post restoration commands,
restoration process priority etc.). You may Use default options or Set the options
manually. If the latter is the case, the settings will be applied only to the current restore
task. Alternatively, you can edit the default options from the current screen. Then your
settings will be saved as default. See
2. Click Next.

6.3.12 Using Acronis Universal Restore

Acronis Universal Restore is an optional Acronis True Image Server for Windows feature. It
should be purchased separately and installed from a separate .msi setup file. The following is
true for Acronis True Image Server for Windows installations including Acronis Universal
Restore.
Acronis Universal Restore option is not available when restoring dynamic disks and volumes.
1. Using Acronis Universal Restore will help you create a bootable system clone on a
different hardware (for more information see
when restoring a system disk (partition) to a computer with other processor, motherboard or
hard disk controller than in the imaged system.
46
12.1 General information
6.4 Se ing restore options tt
).
for more information.
3.6 Acronis Universal Restore
Copyright © Acronis, Inc., 2000-2006
). Choose this