ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER User Manual page 89

If you added a comment to the archive, it will be displayed to the right of the drives tree. If
the archive was protected with a password, Acronis True Image Enterprise Server will ask for
it. Neither the partitions layout, nor the Next button will be enabled until you enter the
correct password.
4. Click Next.
5. If you are to mount an incremental image, Acronis True Image Enterprise Server will
suggest that you select one of successive incremental archives by date/time of its creation.
Thus, you can explore the partition state to a certain moment.
To mount an incremental image, you must have all previous incremental images and the
initial full image. If any of successive images is missing, connection is impossible.
To mount a differential image, you must have the initial full image as well.
6. Click Next.
7. Select a partition to mount as a virtual disk. (Note that you cannot mount the entire disk.)
You can also select a letter to be assigned to the virtual disk from the Drive letter drop-
down list. If you do not want to assign a letter to the virtual drive, select Do not assign.
Copyright © Acronis, Inc., 2000-2006 89