Securing The Power Cable(S); Turning On The System - Dell PowerVault NX3610 Getting Started Manual

Securing The Power Cable(s)

Figure 3. Securing Power Cable(s)
Bend the system power cable(s), as shown in the illustration, and attach to the cable strap.
Plug the other end of the power cable(s) into a grounded electrical outlet or a separate power source such as an
uninterruptible power supply (UPS) or a power distribution unit (PDU).
NOTE: Connect each of the two power cables to independent power sources for maximum redundancy.

Turning On The System

The system turns on automatically when you connect the power supply to a power source.
Installing The Optional Bezel
Figure 4. Installing the Bezel
Install the bezel (optional).
4