Dell PowerVault NX1950 Installation And Troubleshooting Manual page 24

20 If the node is successfully added, the progress bar is green. If there are any
errors, the progress bar is red. Click Back to fix any configuration errors
that caused the failure. After the errors are corrected and the progress bar
is green, click Next.
21 The Completing the Add Nodes Wizard screen appears indicating that
the second node has been added successfully. You can view the log of
events by clicking View Log....
22 Click Finish to complete the process. You can use the Cluster
Administrator tool to verify that the node has been added successfully.
NOTE:
Repeat step 13 to step 22 for each additional node.
24
Setting Up Your Cluster