Linux Host Setup - Dell PowerVault MD3600i Deployment Manual

2 Right-click the network connection you want to configure and select
Properties.
3 On the General tab (for a local area connection) or the Networking tab
(for all other connections), select Internet Protocol (TCP/IP), and then
click Properties.
4 Select Advanced WINS tab and click Add.
5 In the TCP/IP WINS server window, type the IP address of the WINS
server and click Add.
6 To enable use of the Lmhosts file to resolve remote NetBIOS names, select
Enable LMHOSTS lookup.
7 To specify the location of the file that you want to import into the
Lmhosts file, select Import LMHOSTS and then select the file in the
Open dialog box.
8 Enable or disable NetBIOS over TCP/IP.
If using Microsoft Windows Server 2008 Core Version, use the netsh
interface command to configure the iSCSI ports on the host server.

Linux Host Setup

To set up a Linux host network, you must configure the IP address and
netmask of each iSCSI port connected to the storage array. The specific steps
depend on whether you are configuring TCP/IP using DHCP or configuring
TCP/IP using a static IP address.
NOTE:
The server IP addresses must be configured for network communication to
the same IP subnet as the storage array management and iSCSI ports.
If you are using DHCP (root users only):
1 Edit the /etc/sysconfig/network file:
NETWORKING=yes HOSTNAME=mymachine.mycompany.com
Post Installation Tasks
41