Initializing The Embedded Security Chip - HP Tc4400 - Compaq Tablet PC Reference Manual

5. Under Embedded Security, if the device is hidden, select
Available.
6. Select Embedded security device state and change to
Enable.
7. Press
configuration.
8. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save changes and exit. Then
follow the instructions on the screen.

Initializing the embedded security chip

In the initialization process for Embedded Security, you will
Set an owner password for the embedded security chip that
protects access to all owner functions on the embedded
security chip.
Set up the emergency recovery archive, which is a protected
storage area that allows reencryption of the Basic User Keys
for all users.
To initialize the embedded security chip:
1. Right-click the ProtectTools Security Manager icon in the
notification area, at the far right of the taskbar, and then select
Embedded Security Initialization. The ProtectTools
Embedded Security Initialization Wizard opens.
2. Click Next.
3. Set and confirm an owner password, and then click Next. The
Setup Emergency Recovery dialog box opens.
4. Click Next to accept the default recovery archive location, or
click the Browse button to choose a different location, and
then click Next.
5. Set and confirm the emergency recovery token password, and
then click Next.
Reference Guide
to accept the changes to the Embedded Security
f10
Embedded Security for ProtectTools
4–3