Enabling Smart Card Bios Security Mode And Setting The Smart Card Administrator Password - HP Tc4400 - Compaq Tablet PC Reference Manual

Smart Card Security for ProtectTools
Enabling smart card BIOS security mode
and setting the smart card administrator
password
To enable smart card BIOS security mode and set the smart card
administrator password:
1. Select Start > All Programs > HP ProtectTools Security
Manager.
2. In the left pane, select Smart Card Security, and then
select BIOS.
3. In the right pane, under BIOS Security Mode, click Enable.
4. Click Next.
5. Enter the Computer Setup setup password at the prompt, and
click Next.
6. Insert the new administrator smart card, and follow the
on-screen instructions. The instructions vary and may include
the following tasks:
2–4
Initializing the smart card. Refer to
card" for detailed instructions.
Setting the smart card administrator password. Refer to
"Storing the administrator or user card
detailed instructions.
Creating a recovery file. Refer to
file" for detailed instructions.
"Initializing the smart
password" for
"Creating a recovery
Reference Guide